- Products
- Rackmount & Tower
- Supermicro AS-4125GS-TNRT GPU A+ 4U Barebone Dual AMD EPYC 9004 Series Processors
Supermicro AS-4125GS-TNRT GPU A+ 4U Barebone Dual AMD EPYC 9004 Series Processors
• AI / Deep Learning
• High Performance Computing
Barebone 4U Rackmount SuperServer, Supports Dual Socket SP5, Supporting AMD EPYC 9004 Series Processors, Chipset: AMD SP5, Up to 6TB in 24 DIMM slots, L/RDIMM, On-Board : SATA3 (6Gbps), Supported GPU : Up to 8 Double-Width/Single-Width Cards (Full Height Full Length), NVIDIA H100 and AMD MI200 series, Supports both active and passive cooled GPUs, 24x 2.5in hot-swap NVMe/SATA/SAS drive bays (4x 2.5in NVMe dedicated), 1 M.2 NVMe OR 1 M.2 SATA3, Network Connectivity : 2x 10GbE BaseT, Integrated IPMI 2.0 and KVM with Dedicated LAN, 2000W Power Supply - (CSE-418G2TS + H13DSG-O-CPU) - AS -4125GS-TNRT
1. Flexible GPU support: active & passive GPUs Up to 8 direct attached double width, full length GPUs
2. Dual-Socket, AMD EPYC™ 9004 Series Processors
3. 24 DIMM Slots, up to 6TB DDR5 memory
4. 1 M.2 Slot up to 4x 2.5" Hot-swap NVMe drive bays
Extra Specifications for Supermicro AS-4125GS-TNRT GPU A+ 4U Barebone Dual AMD EPYC 9004 Series Processors
GPU | ||
CPU-GPU Interconnect | Direct Attached | |
GPU-GPU Interconnect | NVIDIA® NVLink™ Bridge (optional) | |
Supported GPU | Supports both active and passive cooled GPUs | |
NVIDIA H100 and AMD MI200 series | ||
Up to 8 Double-Width/Single-Width Cards (Full Height Full Length) | ||
System Memory | ||
Memory Voltage | 1.1 V | |
Error Detection | ECC | |
Memory | Memory Type: 4800MHz ECC DDR5 RDIMM/LRDIMM | |
Memory Capacity: 24 DIMM slots | ||
Up to 6TB: 24x 256 GB DRAM | ||
Note | Full memory population recommended for optimal performance. | |
On-Board Devices | ||
Chipset | AMD SP5 | |
Network Connectivity | 2x 10GbE BaseT | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
SATA | SATA3 (6Gbps) | |
System BIOS | ||
BIOS Type | AMI 32MB SPI Flash EEPROM | |
Management | ||
Software | Watch Dog | |
NMI | ||
KVM with dedicated LAN | ||
Redfish API | ||
SuperDoctor® 5 | ||
Intel® Node Manager | ||
IPMI 2.0 | ||
SUM | ||
SSM | ||
SPM | ||
OOB Management Package (SFT-OOB-LIC ) | ||
Power Configurations | Power-on mode for AC power recovery | |
ACPI Power Management | ||
PC Health Monitoring | ||
CPU | Monitors for CPU Cores, Chipset Voltages, Memory | |
7 +1 Phase-switching voltage regulator | ||
FAN | Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | ||
Fans with tachometer monitoring | ||
Temperature | Monitoring for CPU and chassis environment | |
Thermal Control for fan connectors | ||
Power Supply | ||
Certification | Titanium Level | |
Dimension (W x H x L) | 73.5 x 40 x 203 mm | |
AC Input | 1000W: 100-127Vac / 50-60Hz | |
1800W: 200-220Vac / 50-60Hz | ||
1980W: 220-230Vac / 50-60Hz | ||
2000W: 230-240Vac / 50-60Hz | ||
2000W: 220-240Vac / 50-60Hz | ||
2000W: 230-240Vdc | ||
+12V | Max: 83A / Min: 0A (100Vac-127Vac) | |
Max: 150A / Min: 0A (200Vac-220Vac) | ||
Max: 165A / Min: 0A (220Vac-230Vac) | ||
Max: 166A / Min: 0A (230Vac-240Vac) | ||
12V SB | Max: 3.5A / Min: 0A | |
Output Type | Backplanes (gold finger) | |
Product SKUs | ||
Product SKUs | AS -4125GS-TNRT | |
Motherboard | ||
Motherboard | Super H13DSG-O-CPU | |
Processor | ||
CPU | Dual Socket SP5 | |
AMD EPYC™ 9004 Series Processors | ||
Support CPU TDP 400W | ||
Cores | Up to 96C/192T | |
Input / Output | ||
Video | 1 VGA port(s) | |
Chassis | ||
Form Factor | 4U Rackmount | |
Model | CSE-418G2TS | |
Dimensions and Weight | ||
Height | 7" (178mm) | |
Width | 17.2" (437mm) | |
Depth | 29" (737mm) | |
Package | 26.57" (H) x 27" (W) x 41" (D) | |
Weight | Net Weight: 65.5 lbs (29.7 kg) | |
Gross Weight: 100 lbs (45.3 kg) | ||
Available Color | Black Front & Silver Body | |
Expansion Slots | ||
PCI-Express (PCIe) | 9 PCIe 5.0 x16 FHFL slot(s) | |
Drive Bays / Storage | ||
Hot-swap | 24x 2.5" hot-swap NVMe/SATA/SAS drive bays (4x 2.5" NVMe dedicated) | |
M.2 | 1 M.2 NVMe | |
System Cooling | ||
Fans | 8 heavy duty fans with optimal fan speed control | |
Operating Environment | ||
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) |
Name | Part Number | Qty. | Description | |
---|---|---|---|---|
Motherboard / Chassis | MBD-H13DSG-O-CPU | 1 | Super H13DSG-O-CPU Motherboard | |
Motherboard / Chassis | CSE-418G2TS | 1 | 4U Chassis | |
Add-on Card / Module | AOM-PCIE5-418N-1-P | 1 | PCBA FOR AOM-PCIE5-418N-1, R1.00, 10LAYERS, TU-883C, 17" | |
Add-on Card / Module | AOM-PTG-I2T-P | 1 | Riser card using Intel X710 for GPU AMD/Intel systems | |
Backplane | BPN-NVME5-HS219N-S24 | 1 | NVMe Gen5 24-slot direct-attached backplane, support NVMe Gen5/SAS4/SAS3/SATA HDD/SSDs.,RoHS | |
Cable | CBL-0010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF | |
Cable | CBL-MCIO-1228M5FB | 8 | Bundled 2 MCIO x8 (STR to STR),23/28CM,FFC,30AWG,RoHS | |
Cable | CBL-MCIO-1232M5FB | 1 | 2 MCIO (x8 to x8), STR, FFC, 32cm, RoHS | |
Cable | CBL-MCIO-1255M5 | 2 | MCIO x8 (STR to STR),55CM,30AWG,RoHS | |
Cable | CBL-MCIO-1270M5 | 2 | MCIO (x8 STR to x8 STR),70CM,85OHM,RoHS | |
Cable | CBL-PWCD-0900 | 4 | PWCD,US/EU/Canada/China/Australia,IEC60320 C14 TO C13,4FT,17 | |
Cable | CBL-PWEX-0962Y-30 | 8 | 12VHPWR 2x6+4S to McrHi 2X4Y,30cm,6.25A/p,16#,RoHS | |
Cable | CBL-PWEX-1080-10 | 1 | MiniFit 2x2 to MiniFit 2x2, 10A/pin,10cm,16AWG,RoHS | |
Cable | CBL-PWEX-1142-60 | 2 | MicroHi,(2X4 to 2X4) P3.0,60CM,8A/pin,18AWG,RoHS | |
Cable | CBL-SAST-1272-100 | 1 | Slimline x4 (STR) to Slimline x4 (STR),72CM,100 OHM,RoH | |
Cable | CBL-0071L | 1 | ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF | |
Cable | CBL-OTHR-1062A-10 | 1 | [NR] VGA,DP15/F to 2X7F/P2.0,10CM,variant of OTHR-1062,RoHS | |
Cable | CBL-PWEX-1069 | 8 | PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,30CM,22AWG,5A/pin,RoHS | |
Drive Tray(s) | MCP-220-00047-0B | 20 | Black gen 3rd hot-swap 2.5inch HDD tray | |
Drive Tray(s) | MCP-220-00167-0B | 4 | Gen 3 2.5-inch Tool-less NVMe drive tray (clip design),RoHS | |
Drive Tray(s) | MCP-220-21602-0B | 3 | Black 2.5"; HDD dummy cover for SC213,216 (8 HDD Hex hole) | |
Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management | |
Heatsink / Retention | SNK-P0084AP4 | 2 | 4U Active CPU Heat Sink for AMD Socket SP5 Processors | |
*Power Supply | PWS-2K08A-1R OR | 4 | 1U 2000W 100-240VAC Titanium Ultra power supply 73.5x40x203mm | |
*Power Supply | PWS-2K08A-1R2 | 0 | 1U CRPS 2000W Titanium forward airflow, W73.5xL203xH40mm, | |
*Fan | FAN-0199L4-1 | 8 | 92x92x38 mm, 11.5K RPM Cooling fan w/ 5A Fan Connector,RoHS | |
*Front Panel | FPB-TMP-004 | 1 | Thermal Sensor board with 80cm I2C cable | |
*Front Panel | MCP-280-82601-0N | 1 | Front control board adapter (TB826) for SC216,826,936,846 | |
*Rear Window | MCP-240-84802-0N | 1 | 21 slot rear window for SC418X | |
*Parts | MCP-260-41802-0N | 1 | IO shield for X12DPG-OA in SC418G | |
*Rail Set | MCP-290-00057-0N | 1 set | Rail set, quick/quick, default for 4U 17.2" W | |
*Rail Set | MCP-290-00060-0N | 1 | Threaded rail adapter default for round hole rack | |
*Rail Set | MCP-290-00115-0N | 1 | Inner rail, quick-release type | |
*Rail Set | MCP-290-00117-0N | 1 | Outer rail, quick-release type |
Note:
• Parts with * are inside the chassis
• Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
Cable Arm Kit | MCP-290-00127-0NMCP-290-00128-0N | 11 | 39" rail set, quick/quick, 17.2"W, for 2U Gen2 cable arm Gen2 cable arm for (Requires MCP-290-00127-0N) | |||
GPU Link | GPU-NVTNVLINK-A100 | 0 | NVIDIA NVLINK Bridge, Ampere, 2-Way 2-Slot x16 | |||
GPU Link | GPU-XGMIMI100-4P | 0 | MI100 Infinity Fabric Link Bridge Card 4P Adjacent | |||
Power Cable | CBL-PWCD-0579 | $ 18.50 | 0 | Power Cord Type IEC (C14 to C13) 6 ft (14AWG), 15A, 250V | ||
Power Cord Clamp | CBL-0459L | $ 10.00 | 0 | AC Power Cord Latch Clamp |
Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | 1 year of overnight replacement |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |