- Products
- Supermicro SSG-5049P-E1CR45L 4U Storage Barebone Dual Processor
Supermicro SSG-5049P-E1CR45L 4U Storage Barebone Dual Processor
• Backup Storage, Cold Storage
• Database Applications
• Data Warehousing, Archiving
Barebone 4U Rackmount SuperServer, Single Intel Xeon Scalable Processors Gen. 2, Intel C621 chipset, Up to 2TB DDR4 ECC 2933MHz memory, Broadcom 3008 SAS3 IT Mode, 45 Hot-swap 3.5in drive bays, 2 Rear hot-swap 2.5in drive bays, optional 2 SATA or NVMe bays, Redundant 1600W Power Supply (CSE-946LTS-R1K66P1 + MBD-X11SPL-F)
1. Single Socket P (LGA 3647) supports 2nd Gen Intel® Xeon® Scalable processor (Cascade Lake/Skylake) ‡
2. 8 DIMMs; up to 2TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM
3. 2 PCI-E 3.0 x8 (in x16), 3 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8) 1 PCI-E 3.0 x8 (occupied by HBA)
4. 2 GbE LAN ports via Intel i210
5. 45 Hot-swap 3.5" SAS3/SATA3 drive bays, 2 rear Hot-swap 2.5" SATA drive bays; optional 2 rear Hot-swap 2.5" SATA3/NVMe
6. Broadcom 3008 SAS3 IT mode (AOC-S3008L-L8E)
7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
8. 5 Hot-swap 8cm redundant PWM fans
9. 1600W Redundant Power Supplies Platinum Level
Extra Specifications for Supermicro SSG-5049P-E1CR45L 4U Storage Barebone Dual Processor
Motherboard | ||
Motherboard | Super X11SPL-F | |
Processor/Cache | ||
CPU | Single Socket P (LGA 3647) | |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ | ||
Support CPU TDP up to 165W | ||
Cores | Up to 28 Cores | |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. | |
System Memory | ||
Memory Capacity | 8 DIMM slots | |
Up to 2TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro | |
On-Board Devices | ||
Chipset | Intel® C621 chipset | |
SATA | RAID 0, 1, 5, 10 support | |
SATA3 (6Gbps) via Intel® C621 controller | ||
SAS | SW RAID 0, 1, 10 | |
Broadcom 3008 SAS3 IT mode (AOC-S3008L-L8E) | ||
Network Controllers | Dual 1GbE LAN ports with Intel® I210 | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
Graphics | ASPEED AST2500 BMC | |
Input / Output | ||
LAN | 2 RJ45 Gigabit Ethernet LAN ports | |
1 RJ45 Dedicated IPMI LAN port | ||
USB | 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) | |
8 USB 2.0 ports (2 rear + 6 headers) | ||
VGA | 1 VGA port | |
Serial Port / Header | 2 COM Ports (1 rear, 1 header) | |
System BIOS | ||
BIOS Type | AMI UEFI | |
Management | ||
Software | Watch Dog | |
NMI | ||
KVM with dedicated LAN | ||
SuperDoctor® 5 | ||
Intel® Node Manager | ||
IPMI 2.0 | ||
SPM , SUM | ||
Power Configurations | ACPI Power Management | |
PC Health Monitoring | ||
CPU | 4+1 Phase-switching voltage regulator | |
Monitors for CPU Cores, Chipset Voltages, Memory. | ||
FAN | Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | ||
Fans with tachometer monitoring | ||
Temperature | Monitoring for CPU and chassis environment | |
Thermal Control for fan connectors | ||
Chassis | ||
Form Factor | 4U Rackmount | |
Model | CSE-946LTS-R1K66P1 | |
Dimensions and Weight | ||
Width | 17.2" (437mm) | |
Height | 7" (178mm) | |
Depth | 26" (660mm) | |
Weight | Gross Weight: 120 lbs (54.43 kg) | |
Net Weight: 85 lbs (38.56 kg) | ||
Front Panel | ||
Buttons | Power On/Off button | |
System Reset button | ||
LEDs | System Information LED | |
Network activity LEDs | ||
Hard drive activity LED | ||
Power status LED | ||
Power fail LED | ||
Expansion Slots | ||
PCI-Express | 1 PCI-E 3.0 x4 (in x8) | |
2 PCI-E 3.0 x8 (in x16) | ||
3 PCI-E 3.0 x8 | ||
1 PCI-E 3.0 x8 (occupied by HBA card) | ||
M.2 | Key: M-Key | |
Double Height Connector | ||
1x M.2 Interface: PCI-E 3.0 x4 and SATA | ||
Form Factor: 2280, 22110 | ||
Drive Bays / Storage | ||
Hot-swap | 45 Hot-swap 3.5" SAS3/SATA3 drive bays | |
2 Rear Hot-swap 2.5" SATA3 drive bays | ||
Optional | 2 Hot-swap 2.5" NVMe/SATA drive bays (rear) | |
Backplane | ||
Backplane | SAS3 / SATA3 single expander per backplane | |
System Cooling | ||
Fans | 5 High-performance 80mm cooling fans | |
Power Supply | ||
Power Supply | 1600W 1U Redundant Power Supplies with PMBus | |
Total Output Power | 1000W: 100 – 127Vac | |
1600W: 200 – 240Vac | ||
Dimension (W x H x L) | 73.5 x 40 x 265 mm | |
Input | 100-127Vac / 12.9A Max / 50-60Hz | |
200-240Vac / 9.5A Max / 50-60Hz | ||
+12V | Max: 82A / Min: 0.1A (100-127Vac) | |
Max: 132A / Min: 0.1A (200-240Vac) | ||
+5Vsb | Max: 2A / Min: 0.2A | |
Output Type | 25 Pairs Gold Finger Connector | |
Certification | Platinum Level | |
Operating Environment | ||
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | ||
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Product SKUs | ||
Product SKUs | SuperStorage 5049P-E1CR45L (Black) |
Name | Part Number | Qty. | Description | |
---|---|---|---|---|
Motherboard / Chassis | MBD-X11SPL-F | 1 | Super X11SPL-F Motherboard | |
Motherboard / Chassis | CSE-946LTS-R1K66P1 | 1 | 4U Chassis | |
Add-on Card / Module | AOC-S3008L-L8E | 1 | LSI 3008 based SAS3 HBA, 12Gb, 8 internal ports, 122HDD, Gen3 x8 Standard Low Profile | |
Backplane | BPN-SAS3-826TQ-B2B | 1 | 2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD | |
Backplane | BPN-SAS3-946LEL1 | 1 | 45-port 4U SC946L Top-load SAS3 12Gbps expander backplane, support up to 45x 3.5-inch SAS3/SATA3 HDD/SSD | |
Cable 1 | CBL-CDAT-0674 | 1 | 4 Pin to 4 Pin I2C cable, 30cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH | |
Cable 2 | CBL-PWCD-0578 | 2 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG | |
Cable 3 | CBL-PWEX-0863 | 1 | Powerlug to 5.7 Radsok, yel 12AWG, 32cm for SC946S | |
Cable 4 | CBL-PWEX-1024 | 1 | Powerlug to 5.7 Radsok, black 12AWG, 45cm,RoHS | |
Cable 5 | CBL-SAST-0834 | 2 | SLIMLINE SAS to MiniSAS HD, INT, 50CM, 32AWG | |
Heatsink / Retention | SNK-P0068PS | 1 | 2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
Power Supply | PWS-1K66P-1R | 2 | 1U 1600W Redundant Platinum Power Supply 73.5mm width,RoHS/REACH,PBF | |
FAN 1 | FAN-0184L4 | 5 | 80x80x38 mm, 14.4K RPM, Rear Exhaust Fan for SC946S Chassis (60-bay) |
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
Peripheral Drives | MCP-220-82616-0N | $ 83.50 | 1 | Rear hot-swap 2x 2.5" SATA drive kit | ||
Network Card(s) | AOC-SGP-i2 | 0 | Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350-AM2 | |||
Network Card(s) | AOC-SGP-i4 | 0 | Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350 | |||
Network Card(s) | AOC-STGN-i2S | $ 312.50 | 0 | Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES | ||
Network Card(s) | AOC-STGF-i2S | 0 | Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel X710-BM2 | |||
Network Card(s) | AOC-STG-B4S | 0 | Standard Lp, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S | |||
Network Card(s) | AOC-STGS-i2T | $ 344.50 | 0 | Standard Lp, 2x 10GbE RJ45, PCI-E x8, Intel X550-AT2 | ||
Network Card(s) | AOC-S25G-b2S | 0 | Standard LP, 2x 25GbE SFP28, PCI-E x8, Broadcom BCM57414 | |||
Network Card(s) | AOC-S25G-m2S | 0 | Standard LP, 2x 25GbE SFP28, PCI-E x8, Mellanox CX-4 LX | |||
NVMe Optional Parts(Complete System with NVMe Drives) | MCP-220-82619-0N | $ 97.50 | 1 | Rear hot-swap 2.5" x2 NVMe drive kit | ||
NVMe Optional Parts(Complete System with NVMe Drives) | CBL-SAST-0849 | $ 29.50 | 2 | OCuLink v1.0 INT PCIe NVMe SSD, 65CM, 34AWG | ||
NVMe Optional Parts(Complete System with NVMe Drives) | AOC-SLG3-2E4 | $ 206.00 | 1 | Standard LP, Dual-Port NVMe Internal Host Bus Adapter | ||
NVMe Optional Parts(Complete System with NVMe Drives) | CBL-0234L | $ 13.50 | 1 | 4-PIN Y-cable for HDD 15CM | ||
TPM security module | AOM-TPM-9670V | $ 52.00 | 1 | TPM 2.0, vertical form factor | ||
TPM security module | AOM-TPM-9671V | $ 52.00 | 1 | TPM 1.2, vertical form factor | ||
Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |