- Products
- Rackmount & Tower
- Supermicro SYS-2029P-C1R 2U Barebone Dual Intel Processor
Supermicro SYS-2029P-C1R 2U Barebone Dual Intel Processor
Barebone 2U Rackmount SuperServer, Dual Intel Xeon Scalable Processors Gen. 2, Intel C620 chipset, Up to 4TB 3DS LRDIMM DDR4 ECC 2933Mhz memory, 16 Hot-swap 2.5in drive bays, Broadcom 3108 SAS3, 2x 1GBase-T ports Intel X722, Redundant 1200W Power Supply (CSE-213AC-R1K23LPB + MBD-X11DPi-N)
1. Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 16 DIMMs; up to 4TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM ††
3. 4 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 slots, support 5 low-profile AOCs
4. 8x 2.5" SAS3 & 8x 2.5" SATA3 Hot-swap Drive Bays, optional DVD-ROM drive, optional support 2 NVMe/SSD/HDD 2.5" fix drives, 1 M.2 support
5. M.2 Interface: PCI-E 3.0 x4 M.2 Form Factor: 2260, 2280, 22110 M.2 Key: M-Key
6. 2x 1GbE LAN ports with Intel® X722
7. Integrated IPMI 2.0 with KVM and Dedicated LAN
8. 2 SuperDOM, 1 VGA, 2 COM, 2 USB 3.0, 4 USB 2.0, 1 Type A
9. 3 Heavy duty 8cm fans with PWM fan speed and cooling zone control
10. 1200W Redundant Power Supplies Titanium Level (96%)
Extra Specifications for Supermicro SYS-2029P-C1R 2U Barebone Dual Intel Processor
| Motherboard | ||
| Motherboard | Super X11DPi-N | |
| System Memory | ||
| Memory Capacity | 16 DIMM slots | |
| Supports Intel® Optane™ DCPMM †† | ||
| Up to 4TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
| Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
| Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
| On-Board Devices | ||
| Chipset | Intel® C621 chipset | |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 | |
| SAS | Broadcom 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60 | |
| Network Controllers | Dual 1GbE LAN with Intel® X722 | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
| Graphics | ASPEED AST2500 BMC | |
| Input / Output | ||
| SATA | 8 SATA3 (6Gbps) ports | |
| SAS | 8 SAS3 (12Gbps) ports | |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports | |
| 1 RJ45 Dedicated IPMI LAN port | ||
| USB | 2 USB 3.0 ports (2 rear) | |
| 4 USB 2.0 ports (2 rear, 2 front) | ||
| 1 USB Type A | ||
| Video | 1 VGA Connector | |
| Serial Port / Header | 2 COM Ports (1 rear, 1 front) | |
| 2 Fast UART 16550 serial | ||
| System BIOS | ||
| BIOS Type | AMI UEFI | |
| Management | ||
| Software | NMI | |
| Watchdog | ||
| KVM with dedicated LAN | ||
| SuperDoctor® 5 | ||
| Intel® Node Manager | ||
| IPMI 2.0 | ||
| SSM , SPM , SUM | ||
| Power Configurations | ACPI Power Management | |
| PC Health Monitoring | ||
| CPU | 4+1 Phase-switching voltage regulator | |
| Monitors for CPU Cores, Chipset Voltages, Memory. | ||
| FAN | Status monitor for speed control | |
| Pulse Width Modulated (PWM) fan connectors | ||
| Fans with tachometer monitoring | ||
| Temperature | Monitoring for CPU and chassis environment | |
| Thermal Control for fan connectors | ||
| Chassis | ||
| Form Factor | 2U Rackmount | |
| Model | CSE-213AC-R1K23LPB | |
| Dimensions and Weight | ||
| Height | 3.5" (89mm) | |
| Width | 17.2" (437mm) | |
| Depth | 24.8" (630mm) | |
| Package | 11" (H) x 29" (W) x 38.7" (D) | |
| Weight | Net Weight: 38 lbs (17.4 kg) | |
| Gross Weight: 63 lbs (28.8 kg) | ||
| Available Color | Black | |
| Front Panel | ||
| Buttons | Power On/Off button | |
| System Reset button | ||
| LEDs | Power LED | |
| Network activity LEDs | ||
| Hard drive activity LED | ||
| System Overheat LED / Fan fail LED / UID LED | ||
| Expansion Slots | ||
| PCI-Express | 1 PCI-E 3.0 x8 slot | |
| 4 PCI-E 3.0 x16 slots | ||
| Support total of 5 Low-profile AOC | ||
| Drive Bays | ||
| Hot-swap | 8x 2.5" SAS3 and 8x 2.5" SATA3 Hot-swap drive bays | |
| Peripheral | Optional DVD-ROM drive supports 1x slim or 1x 5.25" DVD drive | |
| Optional | Optional 2 NVMe/SSD/HDD 2.5" fix drives | |
| 1 M.2 support | ||
| System Cooling | ||
| Fans | 3 Heavy duty 8cm fans with PWM fan speed and cooling zone control | |
| Power Supply (76mm Width) | ||
| Power Supply (76mm Width) | 1200W Redundant Power Supplies with PMBus | |
| Total Output Power | 1000W/1200W | |
| Dimension (W x H x L) | 76 x 40 x 336 mm | |
| Input | 100-127Vac / 15-12A / 50-60Hz | |
| 200-240Vac / 8.5-7A / 50-60Hz | ||
| 200-240Vdc / 8.5-7A (for CCC only) | ||
| +12V | Max: 83A / Min: 0A (100-127Vac) | |
| Max: 100A / Min: 0A (200-240Vac) | ||
| Max: 100A / Min: 0A (200-240Vdc) | ||
| +5Vsb | Max: 4A / Min: 0A | |
| Output Type | 19 Pairs Gold Finger Connector | |
| Certification | Titanium Level | |
| Operating Environment | ||
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
| Operating Relative Humidity: 8% to 90% (non-condensing) | ||
| Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
| Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
| Processor | ||
| CPU | Dual Socket P (LGA 3647) | |
| Support CPU TDP 70-205W | ||
| 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s | ||
| Cores | Up to 28 Cores | |
| Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) * CPU SKUs not supported: Gold 6256 and Gold 6250(L) (L = increased memory capacity per socket), Gold 6233W and Gold 5216W | |
| Product SKUs | ||
| Product SKUs | SuperServer 2029P-C1R (Black) | |
| Name | Part Number | Qty. | Description | |
|---|---|---|---|---|
| Motherboard / Chassis | MBD-X11DPi-N | 1 | Super X11DPi-N Motherboard | |
| Motherboard / Chassis | CSE-213AC-R1K23LPB | 1 | 2U Black SC213AC Chassis | |
| Add-on Card / Module | AOC-S3108L-H8IR-16DD | 1 | LSI 3108 based SAS3 RAID, 12Gb, 8 internal ports, RAID 0,1,10,5,6,50,60, Gen3 x8 Standard Low Profile | |
| Backplane | BPN-SAS3-213A | 1 | 16-port 2U SAS3 12Gbps direct-attached backplane, support up to 16x 2.5-inch SAS3/SATA3 HDD/SSD | |
| Cable 1 | CBL-SAST-0508-01 | 2 | MINI SAS HD-MINI SAS,6G,INT,50CM,SB,30AWG | |
| Cable 2 | CBL-SAST-0508-02 | 2 | MINI SAS HD-MINI SAS,6G,INT,50CM,SB,30AWG | |
| Cable 3 | CBL-SAST-0532 | 1 | MINI SAS HD,12G,INT,50CM,30AWG | |
| Cable 4 | CBL-SAST-0568 | 1 | MINI SAS HD,12G,INT,35CM,30AWG | |
| Drive Tray(s) | MCP-220-00007-01 | 1 | Black USB/COM port tray for SC825, 836 | |
| Parts | MCP-260-00042-0N | 1 | STD I/O shield for X9 socket R server MB with Gasket. | |
| Manual | MNL-1993-QRG | 1 | SYS-2029P-C1R/SYS-2029P-C1RT, QRG | |
| Heatsink / Retention | SNK-P0068PS | 1 | 2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
| Heatsink / Retention | SNK-P0068PSC | 1 | 2U Passive CPU Heat Sink with a Side Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
| Power Supply | PWS-1K23A-1R | 2 | AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 360x76x40 mm,HF,RoHS/REACH | |
| FAN 1 | FAN-0181L4 | 3 | 80x80x38 mm, 9.4K RPM, Hot-swappable Middle Cooling Fan for X11 Purley Platform Newly Enabled 2U+ Chassis |
| Name | Part Number | Price | Add to Cart | Qty. | Description | |
|---|---|---|---|---|---|---|
| Storage ControllerCard(s) & Cables(s) | AOC-S3008L-L8i &2x CBL-SAST-0531-01 | 0 | Standard LP, 8 internal ports (12Gb/s) Gen-3, 63HDD;RAID 0, 1, 10 | |||
| Storage ControllerCard(s) & Cables(s) | AOC-S3008L-L8e &2x CBL-SAST-0531-01 | 0 | Standard LP, 8 internal ports (12Gb/s) Gen-3, 122HDD;HBA | |||
| Storage ControllerCard(s) & Cables(s) | AOC-S3108L-H8IR &2x CBL-SAST-0531-01 | 0 | Standard LP, 8 internal ports (12Gb/s) 8x Gen3;RAID 0, 1, 5, 6, 10, 50, 60 | |||
| Storage ControllerCard(s) & Cables(s) | AOC-S3108L-H8IR-16DD &2x CBL-SAST-0531-01 | 0 | Standard LP, 8 internal ports (12Gb/s) Gen-3, 16HDD;RAID 0, 1, 5, 6, 10, 50, 60 | |||
| Cable Management Arm | MCP-290-00073-0N | $ 78.00 | 1 | Supermicro Cable Management Arm for 2U, 3U and 4U chassis (Extendable Length: 70mm to 830mm) | ||
| Adaptor Bracket | MCP-120-82503-0N | $ 28.50 | 1 | Cable arm adapter for SC825LP,213LP (MCP-290-00073-0N required),HF,RoHS/REACH,PBF | ||
| SATA DVD Kit | MCP-220-81502-0N | $ 23.00 | 1 | Slim SATA DVD mounting kit for SC213,219,813,815,818,819,825,828,829,836,842 | ||
| 2.5" NVMe fixed drive support | MCP-220-00160-0N | $ 15.00 | 1 | Dual 2.5" NVMe Drive BKT: 743, 745, 502, 503, 510, 512, 515 | ||
| 2.5" NVMe fixed drive support | CBL-SAST-0956 | $ 26.00 | 1 | Oculink to 1 NVMe drive w/ power, each NVMe drive needs 1 cable, system can support total 2 NVMe fixed drives | ||
| 5.25" SATA DVD drive | 5.25" DVD reader or writer | 1 | Any third party 5.25 inch SATA DVD reader or writer | |||
| SATA cable for DVD drive | CBL-0178L | $ 11.50 | 1 | SATA CABLE 48CM FLAT S-S PBF. 26AWG | ||
| SATA Power cable for DVD drive | CBL-0080L | $ 11.50 | 1 | Big 4 pin to SATA POWER ADAPTER CABLE 6", 18AWG | ||
| Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
| Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
| Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
| Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
| Coverage: | Replacement or repair |
| Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
| E-mail: | returnservices@wiredzone.com |
| If you need Technical Support for this item please contact: | |
| Provider: | Supermicro |
| Type of Support: | FULL |
| Phone No.: | 408-503-8000 |
| URL: | Click here for Manufacturer Website |